3G622R

The 3G622R/3G622R+ is a 3G/4G mobile broadband network-compatible 300Mbps Wireless-N router with wireless AP function, 4-port switch and built-in firewall, that provides three options for  Internet connectivity. 

First, you can connect by plugging your mobile broadband modem into the router's built-in USB port – a suitable option for those who want an easy and effective way for multiple computers and network devices to make use of their mobile broadband solution, while keeping the freedom of wireless mobility.  This option opens a new realm of convenience and possibilities for groups traveling closely together or at temporary locations. 

Second is the wireless WAN feature. This feature allows you to set the wireless WAN port to amplify another wireless signal under the protection of the built-in firewall – a useful method when signals are not strong enough in some Wi-Fi areas. 

Third, a DSL/Cable WAN connection port has been retained in the design of the 3G622R/3G622R+ for more conventional networking needs.  

In addition to these access methods, the 3G622R/3G622R+ features MIMO technology to extend range and provide transmission stability, WDS (Wireless Distribution System) to enable you to bridge other wireless routers and extend coverage,  QoS (Quality of Service) bandwidth control to control download speeds for specific IPs, and a Tenda-developed setup wizard that makes installation easy for all users.

In a word, the 3G622R/3G622R+ is your premier choice to share the Internet via 3G and wireless broadband with a 300Mbps Wireless-N LAN.

• Wireless AP, Router, 4-Port Switch, and Firewall
• WPS enabled device
• Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards
• MIMO technology utilizes reflection signal to greatly increase the transmission strength and range
• Supports up to 6 times transmission rate and double the range of 802.11g products
• Meets 64/128-bit WEP, WPA and WPA2 security standards
• Setup wizard for fast and easy configurations
• Supports RTS/CTS protocol and data partitioning
• Provides one 10/100Mbps Auto-Negotiation Ethernet WAN port
• Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports
• Provides one USB 2.0 port for 3G USB modem connection
• Supports xDSL/cable modem static, dynamic and PPPOE connections
• Supports remote/local web management
• Supports WMM for improved audio and video signals
• Supports wireless roaming technology for highly efficient connections
• Supports SSID stealth mode and a MAC address access control
• Supports access control of up to 30 entries of MAC addresses
• Supports Auto MDI/MDIX
• Provides a router system log
• Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
• Supports UPnP and DDNS
• Administration interface supports Firefox 1.0, IE5.5 or above
• Supports LAN access control over Internet connection
• Supports SNTP
• Supports virtual server, DMZ host
• Supports wireless channel auto-selection
• Supports WDS
• Supports URL Monitor
• Supports QoS bandwidth control
• Detachable antenna (“+” model only)